fxs card fxo card e1 card t1 card

 

fxs
-
-
-
-
-
-
-
fxs
-
-
-
-
-
fxo
-
-
-
-
-
fxo
-
-
-
-
fxo
-
-
-
-

buy online

Asterisk Card : TE220P

with 2 E1 / T1 / J1 ports (PCI)

te210p
te210p Photo
e1 card t1 card Buy Now
e1 card t1 card

The TE220P is a with 2 ports, selectable E1 (32-channel) or T1 (24-channel) card that supports all the functionality of the quad T1 / E1 / J1 card. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router.

By utilizing our TDMoE technology, an exclusive process, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications.

The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections.

Of course, the asterisk card TE220P is fully supported by open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting PSTN with the emerging Voice-over IP technologies. The card can be used to deliver a wide range of PBX and IVR services to the network or handset including Three-Way Calling, Call Conferencing,Voicemail ,and VoIP Gateways.

Interfaces:
- 2X E1/T1/J1 interfaces ( E1/T1 selectable)
-PCI interface

Features:

One PRI port 30 channels
Hardware DTMF detection
Conference Bridge
PCM bus connectors (PCM30, PCM64, PCM128)
2 dual-color LEDs (layer 1 state indicators)
Active channel switching (across multiple cards over the external PCM bus)
PRI ISDN protocol stack
Suitable for 3.3 volts and 5.0 volts 32 bit PCI 2.2 slots

Applications:
ISDN PRI PBX
ISDN least cost router
Voice over IP PRI gateways
VoIP integration of ISDN equipment
PBX to PBX trunking
IVR

Data Modes:

Cisco HDLC
HDLC
PPP
Multilink PPP
Frame Relay
Voice Modes:
-EuroISDN
-AT&R 4ESS
-Lucent 5E
-National ISDN2

e1 card t1 card

Under Issabel / FreePBX / Free PBX:

[chinaroby.localdomain ~]# dahdi_genconf
[chinaroby.localdomain ~]# dahdi_cfg -vvvv

DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s): MG2
Configuration
======================
Channel 1: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 1)
Channel 2: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 2)
... ... ... ...
Channel 61: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 61)
Channel 62: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 62)



asterisk cards FXO Card FXS Card E1 Card

Asterisk Card VoIP PBX,IP Phone Appliance

Related Products

E1 T1 Cards
Model No.
Connector
Size
E1 / T1 Ports
Buy
PCI
2U / 4U
1
asterisk card fxo card e1 card
PCI
2U / 4U
1
asterisk card fxo card fxs card
PCI-E
2U / 4U
1
asterisk card T1 E1 card
PCI-E
4U
4
 T1 E1 card
PCI-E
4U
2
 T1 card E1 card
PCI
4U
2
 T1 card E1 card
PCI
4U
4
 T1 card E1 card
PCI
4U
4
 T1 card E1 card
PCI-E
2U / 4U
4
 T1 card E1 card
PCI-E
4U
8
 T1 card E1 card

 

.. .... Top .. Top .... Print .. Print